Friday, December 26, 2014

December 26th, 2014 - Dry Dock Breakwater Pale Ale (NB)


Slightly Confused Brewing Company

Dry Dock Breakwater Pale Ale (Northern Brewer recipe)
Batch 37

Ingredients:
US 2-Row malt
Briess Caramel 60L
Belgian Biscuit
--total grain bill 9.7#

Chinook
Citra (dry hopping)

California Ale Yeast WLP 001
-- Via 1.5 L starter (recycle #1)

Stats:
OG: 1.049 (estimated); 1.042 (measured)
FG: ??? (not provided); 1.008 (measured)
ABV: ??? (not provided); 4.6% (measured)

Brewing Steps:
  • Heated 3 gallons of water to a strike temperature of approximately 165 degrees
    • Target mash temperature 153; volume at 1.25 quarts/pound
    • Used Sparge Pal app for volume calculations
  • Added to mash tun (water, then grains)
    • Mashed 60 minutes
    • Final temperature around 150
  • After mash lautered into bucket (to measure volume)
    • Lautered slowly (seems to help efficiency)
  • Sparged with 5 gallons (minus one pitcher)
    • Heated to 175
  • Let sit for 10 minutes, then lautered until we had about 6.25 gallons (maybe a little more?)
    • No water left over - all sparged; final volume about 6.25
  • Boiled for 60 minutes
    • Added hops
  • Chilled
  • Pitched yeast and aerated wort 
  • Ferment about 2 weeks then rack to secondary
    • Dry hop for 7 days
Notes:
-Second time making this recipe
-Unsure if I put 7# or 9# of 2-row into mash tun. Per brewersfriend.com, at 65% efficiency with 9# estimated OG 1.042; with 7# and 75% efficiency 1.039 (1.049 with 9# and 75% efficiency)

-Put into secondary on 1/19/15
-Took 1 gallon and put into 1 g fermenter with 1/3 - 1/2 of a medium toast oak spiral
---Bottled 7 bombers (about) on 2/7/15; used CO2 tabs for carbonation
---Package says "full extraction in 6 weeks"
-Dry hopped for about 7 days; kegged 1/28/15
---Took 1 g of dry hopped beer and put into 1 g fermenter with 1/3 - 1/2 of a medium toast oak spiral
---Will let sit for 6(?) weeks then bottle. Plan to try original oak-aged version and if not oaky enough will let sit for 6 weeks








    Saturday, December 6, 2014

    December 6th, 2014 - Titletowne IPA (HT)


    Slightly Confused Brewing Company

    Titletowne IPA (Hoggetowne)
    Batch 36

    Ingredients:
    US 2-Row malt
    US 20L Crystal malt
    US 40L Crystal malt
    CaraPils/CaraFoam malt
    --total grain bill 12#
    Assumed 70% efficiency

    Chinook
    Cascade

    California Ale Yeast WLP 001
    -- Via 1.5 L starter (new yeast)

    Stats:
    OG: 1.060 (estimated); 1.056 (measured)
    FG: 1.014(estimated); 1.008 (measured)
    ABV: 6% (estimated); 6.3% (measured)
    91 IBU

    Brewing Steps:
    • Heated 3.8 gallons of water to a strike temperature of approximately 165 degrees
      • Target mash temperature 152; volume at 1.25 quarts/pound
      • Used Sparge Pal app for volume calculations
    • Added to mash tun (water, then grains)
      • Mashed 60 minutes
      • Final temperature around 150
    • After mash lautered into bucket (to measure volume)
      • Lautered slowly (seems to help efficiency)
    • Sparged with 4.9 gallons (minus one pitcher)
      • Heated to 175
    • Let sit for 10 minutes, then lautered until we had about 6.25 gallons (maybe a little more?)
      • No water left over - all sparged; final volume about 6.25
    • Boiled for 60 minutes
      • Added hops
    • Chilled
    • Pitched yeast and aerated wort 
    • Ferment about 2 weeks then rack to secondary
      • Dry hop for 5 days
    Notes:
    -OG likely a little underestimated due to final post-boil volume above 5.5 gallons; didn't seem like much was lost during boil